Affiliate Disclosure: As an Amazon associate, I earn from qualifying purchases.
Hi Friends! Are you ready for Halloween?? It’s coming fast, right?? I am not a huge Halloween decorator, I like to save my craziness for Christmas! But I have made a few Halloween Cricut projects that I wanted to share with you, plus give you a free SVG cut file!
Plus you are in for extra special inspiration because this post is part of Remodelaholic’s Halloween Decor challenge!
So, make sure to scroll down to the end of the post to check out all the other amazing Halloween projects that other crafty bloggers made and watch the Youtube playlist. I’m sure you will find something that will inspire you to get your hands dirty and make something yourself!
Y’all know I love my Cricut and make most of my home decor using it. If you are wanting more information on this amazing machine, click here for my Ultimate Guide of Cricut ideas!
For this project, I made a reverse canvas sign. As you might remember, I made Our Love Story reverse canvas sign with a sharpie instead of iron-on vinyl (click here for a full video tutorial on making a reverse canvas sign without heat transwer vinyl.
Materials Needed for Halloween Cricut Projects
Disclosure: This post contains affiliate links from Amazon and/or Cricut.com. I receive a small commission at no cost to you when you make a purchase using my links.
- canvas – I used a 12×12 square canvas found here
- Heat Transfer Vinyl or Iron-On – I used black glitter HTV because that’s what I had on hand and because I love glitter! Can find at Cricut.com here or on Amazon here.
- Cricut Explore or Cricut Maker – You can find on Amazon here or at Cricut.com here (always check both places for best prices!)
- acrylic paints and brushes – I used black on the frame and different orange shades for the moon
- Contact paper or adhesive vinyl for the moon
- Mod Podge
- staple gun
- orbital sander or sandpaper
- Heat Press, EasyPress or Iron
Ok, let’s get started! I have a video tutorial further down the page if you are more of a visual learner. It also shows you how I painted the moon since that’s a little hard to explain!
Prepping the Reverse Canvas Sign
First thing you’ll want to do is to remove the canvas from the wood frame. Take out all the staples on the back or use a utility knife and cut the canvas right next to the staples. I usually remove them with a utility knife and pliers, just be careful!
Then place the wood frame on top of the canvas and trace its outline. Just cut a little inside the line and you’ll have a perfect size that you will be using.
Prep the frame by sanding it and painting it the color of your choice. On some of my reverse canvas signs, I fill in the holes with wood filler but I skipped that step and just painted the whole thing black. Let it dry.
Cut out the SVG file with your Cricut on heat transfer vinyl.
FREE Halloween SVG Cut File
Download the FREE SVG file by clicking here to use in Cricut Design Space
Download PNG by clicking here and for the moon click here
If you need help on how to download and then upload the file into CDS, click here for my video tutorial.
Load your iron-on shiny side DOWN onto your Cricut mat. Since glitter iron-on is pretty thick, I use a few pieces of blue tape to hold it down at the top and bottom (you’ll see the tape on the video!). Since the moon I’m cutting out as a stencil, I cut it out of contact paper.
Weed out the extra vinyl of the big image and negative weed out the moon (just remove the circle!).
Apply the moon stencil to the canvas, seal the edges with some mod podge, and paint it. You can see in the video how I painted mine. I first painted a yellowish layer over the circle with a paintbrush. I let it dry a little and then used sponge daubers to add two different oranges to it.
I added a little bit of gold sparkle paint at the end. I didn’t let it dry long enough before I heat pressed it, because it stuck to my Teflon sheet. So, if you are going to add some glitter, let it fully dry!
I have a heat press and love it! If you don’t have one, you can use an iron or Cricut EasyPress. If you’d like to check out a video of how I use my heat press click here.
Applying HTV to Canvas
I set my heat press to 305 and pressed for 20 seconds. Removed the plastic, placed a Teflon sheet over it, and pressed for 20 more seconds.
Once your frame is dry, use a staple gun to attach the canvas to the back and you’re done!
Cute and easy, right?
You can also tape some fairy lights (on Amazon here) to the back so that it lights up at night! I just taped the lights so that they would only show through the moon and windows.
The possibilities are endless when it comes to Halloween Cricut projects! If you like glitter like I do and want to learn how to make a glitter jack-o-lantern click here or Halloween glitter wine glasses with Cricut decals click here!
You’ll never guess what this pumpkin stuck to my vase is made of! Find out how to easily make your own by clicking here!
Now sit back and get inspired by other bloggers and the Halloween Decor that they made! Watch the playlist and then hop on over to their blogs (listed below video) to check out their tutorials!
Reverse Canvas Halloween Decor | Leap of Faith Crafting
Dollar Store Halloween Decor + Mantel | Remodelaholic
Trick or Treat Halloween Sign w/Cut File | Creative Ramblings
Jack-o-Lantern Halloween Candy Dish | Kailyn Williamson
Dollar Store Mr. and Mrs. Spider | The How-To Home
Upcycled Tin Pumpkin | Sustain My Craft Habit
Large Skeleton Poster | Deeply Southern Home
Rustic Pallet Pumpkin | Hertoolbelt
Quick Dollar Store Halloween Centerpiece | Our Crafty Mom
Easy Halloween Chalkboard Art | Create and Babble
Modern Dollar Tree Pumpkin Makeover | Smiling Colors
Thanks so much for stopping by! Have a creative day!